
Battery-powered wireless DMX hub · 2.4 GHz wireless DMX-512
SmartBox
Battery powered hub · wireless DMX · WiFi
The SmartBox is the battery-powered half of AirDMX: a hub that transmits or receives 2.4 GHz wireless DMX-512 with no mains feed, so the rig can be controlled where there is no power point.
A central hub that runs from its own battery, so it can sit where the rig is rather than where the power is. It puts console DMX-512 on the air for the whole Smart Series, hosts the AirApp over its 2.4 GHz WiFi module, and can turn radio back into cable when a fixture needs a wired feed.
Typical use: Rigs with no convenient power or DMX position, mid-show repositioning, and phone control through the AirApp.
Full specification sheet — DMX channels, wireless modes and pairing — supplied on request. W-DMX (G3 / G4 / G4S) or LumenRadio CRMX receiver options are quoted per order.
- Function
- Central hub · wireless DMX-512 transmitter · WiFi hub · wireless DMX receiver
- Radio
- 2.4 GHz · AirDMX / CRMX transceiver, W-DMX G3 / G4 / G4S compatible
- DMX
- DMX-512 in from any console on an ordinary data cable; DMX-512 out on cable in receiver mode
- Pairing
- 16 ID groups, so neighbouring rigs do not cross
- WiFi
- 2.4 GHz module for the free AirApp on iOS and Android
- Controls
- OLED display · MENU / DOWN / UP / ENTER keys · rotary encoder
- Antennas
- Two external antennas
- Power
- Battery powered — no mains lead at the box
How this hub is controlled
AirDMX is built in; RF remote, W-DMX and CRMX are options on the same board.
AirDMX · standard
Console over 2.4 GHz
A DMX-512 desk drives the rig through the AirBox or the battery-powered SmartBox. Addresses stay as patched; no cable to the fixture.
RF remote
Four groups, no line of sight
An RF handset changes colour, intensity and programs for up to four ID groups — no console, no AirBox, no pointing at the fixture.
W-DMX / CRMX
Drop into an existing rig
Same radio, supplied in W-DMX G3 / G4 / G4S or LumenRadio CRMX mode on request, for rental companies already running those transmitters.
Same family
Fixtures that share this housing, battery platform and radio.
Questions buyers ask
Short answers, with the numbers behind them.
- What does the SmartBox do?
- It carries wireless DMX-512 out at the rig on its own battery - transmit or receive - so no power point is needed at the truss or at the wall.
- How is it operated?
- Through an OLED display and a four-button plus encoder interface: address, group and mode are set on the unit itself, without a laptop.
- How is it different from the AirBox?
- The AirBox is console-side and mains-powered. The SmartBox does the same job on battery, so it can go where the fixtures are.

