
Wireless DMX transmitter · 2.4 GHz wireless DMX-512
AirBox
Wireless DMX transmitter · WiFi hub
The AirBox is the console-side half of AirDMX: it takes DMX-512 on an ordinary data cable and puts the same universes on 2.4 GHz, so the rig has no data cable in the room.
Wireless DMX transmitter that puts console output on the air for the whole Smart Series, and a 2.4 GHz WiFi hub for the AirApp. Address the fixtures as normal and the rig behaves as if it were cabled.
Typical use: Putting an existing console in the air, mixed rigs, and phone control through the AirApp.
Full specification sheet — DMX channels, wireless modes and pairing — supplied on request. W-DMX (G3 / G4 / G4S) or LumenRadio CRMX receiver options are quoted per order.
- Function
- Wireless DMX-512 transmitter · WiFi hub · wireless DMX receiver
- Radio
- 2.4 GHz · AirDMX / CRMX transceiver, W-DMX G3 / G4 / G4S compatible
- DMX input
- From any DMX-512 console, on an ordinary data cable
- Pairing
- 16 ID groups, so neighbouring rigs do not cross
- WiFi
- 2.4 GHz module for the AirApp on iOS and Android
- Modes
- Transmitter (console in, radio out) · WiFi hub (AirApp) · receiver (radio in, cable out)
- Antennas
- Two external antennas
How this hub is controlled
AirDMX is built in; RF remote, W-DMX and CRMX are options on the same board.
AirDMX · standard
Console over 2.4 GHz
A DMX-512 desk drives the rig through the AirBox or the battery-powered SmartBox. Addresses stay as patched; no cable to the fixture.
RF remote
Four groups, no line of sight
An RF handset changes colour, intensity and programs for up to four ID groups — no console, no AirBox, no pointing at the fixture.
W-DMX / CRMX
Drop into an existing rig
Same radio, supplied in W-DMX G3 / G4 / G4S or LumenRadio CRMX mode on request, for rental companies already running those transmitters.
Same family
Fixtures that share this housing, battery platform and radio.
Questions buyers ask
Short answers, with the numbers behind them.
- What is the AirBox for?
- It replaces the long DMX run from the console to the rig. The desk feeds the AirBox on a data cable, and the AirBox transmits on 2.4 GHz.
- Does the AirBox need mains power?
- Yes - it sits at the console, where power is available. If there is no power at the rig either, the SmartBox does the same job on battery.
- Which receivers work with it?
- Every SDJ fixture carries the AirDMX receiver on the board. W-DMX G3 / G4 / G4S and LumenRadio CRMX receivers can also be supplied to match existing stock.

