
Battery uplight · IP65 · Wireless DMX-512
SmartPAD 3
3 × 10W · Q / H variants
A battery uplight is a self-contained LED fixture that colours a room or washes a wall with no power cable and no distro. The SmartPAD 3 carries 3 × 10W in a 2.05 kg IP65 housing and runs 12 h per charge.
A flat 70 mm pad with three 10W emitters — it tucks under a table, against a wall or behind furniture, and washes upward from floor level.
Typical use: Under-table and low-profile uplighting, furniture and set pieces, tight floor space.
Full datasheet — beam angle, lux at distance, battery runtime and DMX channel map — supplied on request. W-DMX (G3 / G4 / G4S) or LumenRadio CRMX receiver options are quoted per order.
- Light source
- 3 × 10W ceramic SMD LED · Q: RGBW / RGBA / RGBL · H: RGBAW+UV
- Beam angle
- 25° standard · 15° / 45° lenses
- Battery
- 11.1V 6.7Ah lithium-ion · BMS protected
- Runtime (MAX)
- 12 h single colour · 7 h dual colour · 4 h RGBW
- Channels
- 3 / 4 / 6 / 9 CH · 3 / 6 / 8 / 11 CH
- Wireless DMX
- Built-in 2.4 GHz receiver · AirDMX standard · W-DMX G3 / G4 / G4S or LumenRadio CRMX on request · 16 ID groups
- Control mode
- AirDMX · W-DMX · master / slave · stand alone · sound active · RF remote (4 group IDs) · AirApp
- Rated power
- 30W · charger DC12.6V (5.5 × 2.1)
- Size / weight
- 191 × 155 × 70 mm · 2.05 kg · 12 per charging case
- Rating / housing
- IP65 · aviation aluminium · OLED display, four touch keys · 16-bit dimming · 25,000 Hz refresh
How this fixture is controlled
AirDMX is built in; RF remote, W-DMX and CRMX are options on the same board.
AirDMX · standard
Console over 2.4 GHz
A DMX-512 desk drives the rig through the AirBox or the battery-powered SmartBox. Addresses stay as patched; no cable to the fixture.
RF remote
Four groups, no line of sight
An RF handset changes colour, intensity and programs for up to four ID groups — no console, no AirBox, no pointing at the fixture.
W-DMX / CRMX
Drop into an existing rig
Same radio, supplied in W-DMX G3 / G4 / G4S or LumenRadio CRMX mode on request, for rental companies already running those transmitters.
Same family
Fixtures that share this housing, battery platform and radio.
Questions buyers ask
Short answers, with the numbers behind them.
- How long does the SmartPAD 3 run on battery?
- 12 h at full output. It depends on the colour mix: single colour lasts longest and RGBW shortest, so a 4pm set-and-leave still has light at midnight.
- How many SmartPAD 3 fit in one charging case?
- 12 per charging case, charged by magnetic contact - no cable per fixture.
- Is the SmartPAD 3 IP65 rated?
- Yes. IP65, so it stands in a marquee, on a terrace or in light rain without a rain cover.
- What beam angle does the SmartPAD 3 ship with?
- 25 degree as standard. 15 and 45 degree lenses are options, and the PDLC diffusion layer softens the edge without a lens change.
- Does the SmartPAD 3 work with W-DMX or CRMX?
- Yes. AirDMX wireless DMX-512 is built in, and the receiver can be supplied in W-DMX G3 / G4 / G4S or LumenRadio CRMX mode to match the transmitter you already run.

