Home Products AirDMX About Applications Guides Contact
eileen@sdj-lighting.com
+86 138 1968 9970 (WeChat / WhatsApp)

Guides · weddings

Cable-free wedding uplighting: quantity, placement and timing

No sockets, no cable runs across a dance floor, no trip hazards. The trade is planning: the fixtures have to be charged, counted and placed before the guests arrive.

How many fixtures does the room need?

Work along the walls, not around the whole room. For an even wash, plan one fixture every 3 to 4 m of wall, standing 0.3 to 0.6 m out from the wall and aimed up. A 20 m stretch of wall is five to seven fixtures; a typical 120-guest ballroom runs twelve to twenty units across the walls and the entrance.

Those numbers are the range where a 25 degree beam still overlaps between units. If you want a tighter, more theatrical look, use fewer units and accept visible separation; if you want a continuous sheet of colour, use the higher end and add a 45 degree lens or open the PDLC zoom.

Placement rules that survive contact with a venue

  • Outside the guest line. Keep fixtures behind tables and planters, so nobody stands in the beam or knocks a unit over.
  • Aim at the wall, not at the room. A 25 degree beam from 0.5 m away covers about 0.22 m of wall — that is a stripe, not a wash. Move the unit to 1 m and you get roughly 0.44 m; for a proper wall wash, place it 1.5 to 2 m out or fit the 45 degree lens.
  • Watch the ceiling. A battery uplight on the floor throws all its light upward. Low marquee ceilings will bounce colour back down; that can be beautiful, but check it at the site visit.
  • Keep the path clear. IP65 bodies and a 2.4 kg weight mean a bumped fixture stays put, but a cable would still be a hazard. There is no cable to trip over — that is the point.

Colour plan against runtime

A wedding usually needs three looks: warm single colour for dinner, a deeper colour for the first dance, and something brighter for the late set. Each colour change is a run on the battery.

On NEO 6: 12 hours single colour, 7 hours dual colour, 4 hours full RGBW. On ENZO 18: 12 hours single colour, 8 hours dual, 4 hours RGBW. A five-hour evening of continuous colour mixing in RGBW is a whole battery; a mostly single-colour evening leaves plenty in reserve. Either plan the looks as single colours, or plan a second set of units for the long night.

Charging: the part that decides whether the day works

Ten NEO 6 charge together in one case on a normal socket; four ENZO 18 charge in one case. Charge the night before, not the morning of, and confirm the venue has a socket you can reach without moving furniture. Chargers run at DC 12.6 V for NEO 6; ENZO 18 charges on AC 110–240 V with PowerCON TRUE1 in and out, so a case can be daisy-chained.

Bring a spare set of four to six units for a full-day event. It is cheaper than a second trip.

A one-page run sheet

WhenWhat
Two weeks outConfirm wall lengths, ceiling height, outdoor or indoor, and the number of colour looks.
Day beforeCharge every case to full, pair the wireless, set ID groups by zone, test all fixtures on the console.
Set-upPlace fixtures out from the wall, aim up, check the wash line from the back of the room, then lock the look.
DoorsSet the first look at the console; keep the remote for last-minute changes without walking the room.
TeardownCount fixtures against the case, invert nothing that is wet, charge again before storage.

Questions we get asked

Do we need an electrician on site? No. That is the reason to use battery fixtures. You need one socket for the charging cases, not a distribution board.

Will the colour last the whole reception? On a single colour, yes — twelve hours is longer than most weddings. On continuous RGBW mixing, budget four hours and plan either a colour discipline or a spare set.

Can the planner control the colour? Every fixture takes DMX-512 over AirDMX, plus a four-group RF remote and the AirApp. A planner can change the look from a phone without touching the rig.

Need a quotation for a specific room? Send the wall length, the number of looks you need and whether the venue is outdoors. We answer with a fixture count, a runtime estimate and a charging plan.

Request a quote