Guides · control
AirDMX, W-DMX and CRMX: three radios, one job
All three carry DMX-512 across a room without a cable. They differ in who owns the protocol, how the link pairs, and how well they behave in a crowded 2.4 GHz venue.
What each one is
AirDMX is our own name for the 2.4 GHz link built into every fixture on this site. Sixteen ID groups, a four-group RF remote, and AirApp control from a phone or tablet. It is the standard build because it keeps the receiver cost inside the fixture instead of in a separate dongle.
W-DMX is the Wireless Solution protocol, widely used by rental houses in G3, G4 and G4S versions. If your warehouse already runs W-DMX transmitters, matching receivers is the shortest path to a working rig.
LumenRadio CRMX is the LumenRadio link, common in film and television, with the Timo FX transmitter as a typical front end. It is known for dense multi-universe setups and for behaving well on set.
Comparison at a glance
| AirDMX | W-DMX | CRMX | |
|---|---|---|---|
| Owner | SDJ | Wireless Solution | LumenRadio |
| Band | 2.4 GHz | 2.4 GHz | 2.4 GHz |
| Built into fixtures | Standard | On request (G3 / G4 / G4S) | On request (Timo FX option) |
| Group / ID control | 16 ID groups, 4-group RF remote | Per transmitter | Per transmitter |
| App control | AirApp | No | No |
| Typical use | Events, weddings, rental stock | Rental houses already on W-DMX | Film, TV, dense multi-universe |
Interoperability is the real question
A transmitter and a receiver must speak the same language. AirDMX transmitters will not drive W-DMX receivers, and the reverse. If you are adding battery fixtures to an existing rig, decide the protocol before you order, because it is a build option on our side: W-DMX G3 / G4 / G4S or LumenRadio CRMX receivers can be fitted to the same body.
If you are building a rig from scratch, AirDMX keeps the receiver inside the fixture and adds app control — and an AirBox or SmartBox puts DMX-512 into the air from a console.
Planning a crowded 2.4 GHz room
- Keep the transmitter high and in line of sight. Bodies, not distance, are what kill 2.4 GHz links.
- Do not sit on top of the venue Wi-Fi. Sixteen ID groups exist so you can move away from a busy channel.
- Give each zone its own group: wall wash, chandeliers, entrance. One failed link then costs one zone, not the show.
- Test with the doors open. A room full of guests absorbs 2.4 GHz differently from an empty one.
What to put in the RFQ
- Which protocol the fixtures must speak, by name and version.
- Whether the receiver is built in or a dongle, and whether it is powered from the fixture.
- How many universes and how many zones you plan to run.
- Whether a handheld remote or app control is needed on top of the console.
- Whether the site has known 2.4 GHz congestion — a hotel with hundreds of phones is the usual case.
Questions we get asked
Can I run AirDMX fixtures from a W-DMX transmitter? Not directly. Specify W-DMX receivers at order time if that is your console side.
Is 2.4 GHz reliable in a hotel ballroom? Usually yes with line of sight and a group away from the Wi-Fi. It is less reliable through several walls and a crowd of phones.
Do I need a console at all? No. Stand-alone, sound-active, master / slave and the RF remote all work without one — which is how most wedding rigs run.
Need a quotation for a specific room? Send the wall length, the number of looks you need and whether the venue is outdoors. We answer with a fixture count, a runtime estimate and a charging plan.
Request a quote